How to get a quote:
- Place all your files in one STL file, keeping them at least 1.5mm apart.
- Save your 3D CAD file as an STL (click here if you don’t have CAD) (Click here if you don’t know how to save as an STL)
- Select Economy (10p* per cm3) or Express (20p* per cm3)
How to make it cheaper:
We charge for the total XYZ volume of an STL file but at a tenth of the going rate. This means that you don’t have to give the parts thin walls to make them cheaper, and you don’t have to hollow them or leave a hole. It also means that you can fit loads of models on the same STL file, and all the little parts could be free!
Please note that we have a minimum individual part cost of £2.00* and a minimum order of £15.00*. We also add a 1mm buffer all the way around the STL to avoid collisions with other models…. i.e. if your box is 100mm x 100mm x 100mm, you will be charged for 102mm x 102mm x 102mm.
*excludes VAT @20%
*****NB. If the Upload function does not work, please send files to:
firstname.lastname@example.org via wetransfer